搜索结果: 46-60 共查到“知识库 热处理工艺与设备”相关记录191条 . 查询时间(6.249 秒)
谈谈美国“热处理技术发展路线图”
美国 热处理技术发展路线图
2010/6/30
我国热处理界非常重视美国的发展规划,首先 热处理学会荣誉理事长樊东黎教授著文介绍了美国的热处理发展规划[1,3],之后热处理学会于2007年4月在重庆召开的热处理学会常务理事会上对此规划进行了讨论,并将讨论意见陆续在《金属热处理》及《中国热处理技术通讯》上发表[2,4-7]。对我国热处理现状以及今后的发展提出了许多非常宝贵的意见。
综述了哈尔滨工业大学稀土化学热处理研究和应用成果。包括:稀土渗碳及碳氮共渗、稀土渗氮及软氮化、等离子体稀土渗氮、稀土渗硼及硼铝共渗、稀土多元共渗、稀土渗金属工艺技术;稀土的催化和微合金化机制;稀土化学热处理过程的数学模型与计算机仿真等。
我国模具材料与模具热处理研究进展
模具材料 模具热处理
2010/6/30
五十年代,我国模具用钢全部因袭国外钢号。进入六十年代,为了节约原材料和提高毛坯精度,少无切削工艺和精密成形技术有了迅速的发展,为了提高生产效率,采用了许多高效压力加工设备,锻锤逐渐被压力机替代。原用模具钢的性能常不能满足服役条件对性能的高要求,影响了模具的使用寿命和压力加工新工艺新设备的推广应用。七十年代末,精密及大型工程塑料制品的使用日益广泛,对塑料模具用钢的需求量急剧增加,对塑料模具钢的性能也...
材料热处理技术发展史
材料热处理技术 发展史
2010/6/30
材料热处理在中国有悠久的历史。 与世界其他地区相比,中国古代热处理技术的发展有 明显的区域特色,在某些方面中国的热处理技术落后于其它地区,但也有许多发明和技术在世界 热处理史上处于遥遥领先的地位,其中不少成果还传播到了世界各地,对世界热处理技术的进步 起到了直接的促进作用。
Application of Hot Forming High Strength Steel Parts on Car Body in Side Impact
hot forming high strength steel lightweight side impact car body
2011/8/3
Lightweight structure is an important method to increase vehicle fuel efficiency. High strength steel is applied for replacing mild steel in automotive structures to decrease thickness of parts for li...
FGH96粉末高温合金涡轮盘淬火过程界面换热系数的研究
粉末高温合金涡轮盘 热处理 界面换热系数 数值模拟
2013/9/30
以试验方法研究了FGH96粉末高温合金涡轮盘在空冷、风冷和油淬等条件下的表面换热行为,进而反算求解得到了界面换热系数,并将其应用到实际盘件热处理过程的数值模拟当中.结果表明,油淬条件下的界面换热系数远大于其他两种冷却方式,其最大值约为空冷换热系数最大值的10倍.现有工艺适合文中涡轮盘的热处理,淬火应力低于材料对应温度的屈服强度.
Research of thermal processes in cutter edge made of HS 3-1-1,5 low-alloyed high-speed steel
High-speed steel Temperature field Thermal conductivity
2010/1/11
The physical and mathematical description of tools wear during technological process and need to the enlarge tool life require knowledge of material data, e.g. density, specific heat and coefficient o...
Technological plasticity and structure in stainless steels during hot-working
Metallic alloys Hot deformation Microstructure
2009/12/14
Purpose: The high-temperature plastic deformation is coupled with dynamic processes of recovery influencing the structure and properties of alloys. One of crucial issues is finding the interdependence...
Influence of heat treatment on micro-structure of slurry aluminide coatings type TiAlSi obtained on TiAlCrNb alloy
Thin and thick coatings Aluminides Microstructural stability
2009/12/14
Purpose: Influence of heat treatment on microstructural changes in slurry TiAlSi coating deposited with 12.5% Si concentration on Ti48Al2Cr2Nb intermetallic alloy and investigation of the influence of...
2124铝合金的均匀化热处理
2124铝合金 均匀化处理 显微组织 动力学
2010/4/1
采用光学显微镜、差热分析、扫描电镜、能谱分析、透射电镜和X射线衍射研究2124铝合金铸态与均匀化态的显微组织演化和成分分布。结果表明:2124铝合金的铸态组织枝晶偏析严重,在晶界存在很多低熔点共晶相,合金中元素Cu,Mg和Mn在晶内及晶界分布不均匀;经过均匀化处理后,2124铝合金组织中的非平衡相逐渐溶解,各组元分布趋于均匀;该合金的过烧温度为504 ℃,最佳均匀化制度为(490 ℃,24 h),...
Microstructure evolution of high-manganese steel during the thermomechanical processing
Materials Metallic alloys High-manganese steel
2009/12/3
Purpose: The aim of the paper is to determine the influence of hot-working conditions on microstructure evolution of new-developed high-manganese austenitic steel.
Design/methodology/approach: The ho...
FEM–based thermal modelling of the cutting process using power lawtemperature dependent concept
Tool materials Machining Thermal behaviour
2009/12/2
Purpose: Purpose of this study is to compare two variants of the FEM simulation model of orthogonal cutting
process of AISI 1045 carbon steel with uncoated and multilayer-coated carbide tools i.e. st...
GWN751K镁合金均匀化热处理
稀土镁合金 均匀化 显微组织
2010/3/31
通过OM、SEM及布氏硬度分析,研究GWN751K镁合金在不同状态下的显微组织与性能,确定该合金的双级均匀化工艺参数。结果表明:合金经过440 ℃、6 h初级均匀化后,共晶组织开始发生分解,晶粒开始长大;经过535 ℃、16 h热处理后,合金晶粒明显长大,但元素分布 较为均匀,晶界处仅明显残留含Y化合物;均匀化处理使合金的力学性能得到改善,合金断裂强度为245 MPa,屈服强度为192 MPa,伸...
基于商业软件CFX4.3和自编程序,建立了一套CFD模拟系统,并以新钢公司80 t/h蓄热式加热炉为对象,对其进行适当简化的三维动态数值模拟研究,分析了钢坯在炉内的加热过程,并与生产记录数据和现场测试进行对比. 结果表明,蓄热式加热炉能获得较好的流场和温度场分布,钢坯出炉前温度达到1460 K以上,钢坯内各节点的温差不超过10 K,基本满足高效、低耗的钢坯加热工作需要. 但本研究的蓄热式加热炉在生...
Study of secondary recrystallization in grain-oriented steel treated under dynamical heat treatment conditions
abnormal grain growth Goss texture grain oriented electrical steel
2009/10/23
The present study was made to investigate secondary recrystallization in grain-oriented steels annealed at short time temperature exposures with application of dynamical heating. The investigated GO s...