搜索结果: 1-15 共查到“机械工程 modeling”相关记录32条 . 查询时间(0.161 秒)
2017年第14届电路设计综合,建模,分析与仿真方法与应用国际会议(2017 14th International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design)
2017年 第14届 电路设计 综合 建模 分析 仿真方法 应用 国际会议
2017/5/22
The 14th International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design (SMACD 2017) will be held from the 12th to the 15th of June 2017 in Giardin...
High-fidelity modeling of a backhoe digging operation using an explicit multibody dynamics finite element code with integrated discrete element method
Multibody dynamic discrete element method backhoe
2015/1/12
In this thesis, a high- fidelity multibody dynamics model of a backhoe for simulating the digging operation is developed using the DIS (Dynamic Interactions Simulator)multibody dynamics software. Sand...
MODELING AND CONTROL OF HYDRAULIC WIND ENERGY TRANSFERS
Hydraulic Transmission System Hydraulic System Modeling Hydraulic System Control
2015/1/12
The harvested energy of wind can be transferred to the generators either through a gearbox or through an intermediate medium such as hydraulic fluids. In this method, high-pressure hydraulic fluids ar...
MODELING THE INTERDEPENDENCE OF ELECTROCHEMICAL AND MECHANICAL PROPERTIES IN PER SULFONATE ACID PROTON EXCHANGE MEMBRANES
PEM fuel cell membrane Conductivity Measurement
2015/1/12
Proton exchange membrane fuel cells (PEMFC’s) offer an attractive alternative energy resource over traditional fossil fuels. The advantages such as high power density, relatively quick start-up, rapid...
Modeling of Flash Boiling Flows in Injectors with Gasoline-Ethanol Fuel Blends
Flash Boiling Flows Injectors Gasoline-Ethanol Fuel Blends
2014/10/24
Flash boiling may be defined as the finite-rate mechanism that governs phase change in a high temperature liquid that is depressurized below its vapor pressure. This is a transient and complicated phe...
Engineering Modeling, Analysis and Optimal Design of Custom Foot Orthotic
Engineering Modeling Analysis Optimal Design Custom Foot Orthotic
2014/10/24
This research details a procedure for the systematic design of custom foot orthotics based on simulation models and their validation through experimental and clinical studies. These models may ultimat...
Design and Modeling on Stranded Wires Helical Springs
stranded wires helical spring mathematical model finite element analysis
2011/8/4
A stranded wires helical spring is formed of a multilayer and coaxial strand of several wires twisted together with the same direction of spiral. Compared with the conventional single wire spring, the...
Modeling Method of Automotive Body CAN/LIN Nets Application Protocol Based on Object-oriented Colored Petri Net
automotive body CAN/LIN bus information sharing
2011/8/4
Recently automotive nets are adopted to solve increasing problems in automotive electronic systems. Technologies of automotive local area network from CAN and LIN can solve the problems of the increas...
Accelerated Degradation Reliability Modeling and Test Data Statistical Analysis of Aerospace Electrical Connector
electrical connector performance degradation reliability
2011/8/4
As few or no failures occur during accelerated life test, it is difficult to assess reliability for long-life products with traditional life tests. Reliability assessment using degradation data of pro...
Design and Modeling on Stranded Wires Helical Springs
stranded wires helical spring mathematical model finite element analysis
2011/8/4
A stranded wires helical spring is formed of a multilayer and coaxial strand of several wires twisted together with the same direction of spiral. Compared with the conventional single wire spring, the...
Crystal Plasticity Finite Element Process Modeling for Hydro-forming Micro-tubular Components
micro-mechanics modeling micro-forming hydro-forming
2011/8/3
Micro-tubes manufactured by hydro-forming techniques have now been widely used in medical and microelectronics applications. One of the difficulties in forming such parts is the control of localized n...
Spatial Operator Algebra for Free-Floating Space Robot Modeling and Simulation
nonholonomic constrained spatial operator algebra dynamic
2011/8/3
As the dynamic equations of space robots are highly nonlinear, strongly coupled and nonholonomic constrained, the efficiency of current dynamic modeling algorithms is difficult to meet the requirement...
Modeling and Analysis of Novel Integrated Radial Hybrid Magnetic Bearing for Magnetic Bearing Reaction Wheel
magnetic bearing reaction wheel radial hybrid magnetic bearing
2011/8/3
Conventional ball bearing reaction wheel used to control the attitude of spacecraft can’t absorb the centrifugal force caused by imbalance of the wheel rotor, and there will be a torque spike at zero ...
Locating Error Considering Dimensional Errors Modeling for Multistation Manufacturing System
ZHANG Faping LU Jiping TANG Shuiyuan SUN Houfang
2011/8/3
Multistation machining process is widely applied in contemporary manufacturing environment. Modeling of variation propagation in multistation machining process is one of the most important research sc...
Modeling and Verification of an Astronaut Handling Large-mass Payload
extravehicular activity inverse kinematics inverse recursive dynamics ADAMSTM
2011/8/3
The experiments on astronaut motions are difficult to conduct due to the limitation and high cost of constructing or simulating the microgravity environment of space. Therefore, the method of computer...