搜索结果: 1-9 共查到“机械工程 Aluminium”相关记录9条 . 查询时间(0.062 秒)
Microstructure and properties of FSW joints of 2017A/6013 aluminium alloys sheets
Friction Stir Welding Aluminium alloy 2017A Aluminium alloy 6013
2009/12/2
Purpose: The aim of the studies was to analyse the structure and mechanical properties of FSW joints. Experiment were perform in order to study possibilities to join different aluminium alloys 2017A a...
Purpose: of this paper is to analyze the results of tests on the mechanical properties and microstructural changes
in Friction Stir Welds in the aluminium alloy 6082-T6 in function of varying process...
Wear Behaviour of Zinc-Aluminium Alloys and the Bearings Produced from these Alloys
Zinc-aluminum alloys journal bearings wear
2009/10/14
In this study, two ternary zinc-aluminum-copper and two quaternary zinc-aluminum-copper-silicon alloys were produced by permanent mould casting. The wear behaviour of these alloys were investigated wi...
Investigations for deducing wall thickness of aluminium shell casting using three dimensional printing
Rapid prototyping 3D printing Commercial aluminium alloy
2010/1/19
Purpose: of the present study is to verify the feasibility of decreasing the shell thickness in rapid shell casting
based upon ‘three dimensional printing’ technology in order to evaluate the dimensi...
3D finite element analysis of metal flow in hot aluminium extrusion of T-shaped profile with various offset pockets
Extrusion Finite element model Aluminium
2010/1/19
Purpose: The present paper has therefore investigated influence of offset pocket design on metal flow behaviour
in hot aluminium extrusion of a T-shaped profile.
Design/methodology/approach: A serie...
Optimization of Surface Roughness in End Milling on Mould Aluminium Alloys (AA6061-T6) Using Response Surface Method and Radian Basis Function Network
Response Surface Method Radian Basis Function Network Surface roughness
2010/1/15
This paper is concerned with optimization of the surface roughness when milling Mould Aluminium alloys (AA6061-T6) with carbide coated inserts. Optimization of milling is very useful to reduce cost an...
Anodization of cast aluminium alloys produced by different casting methods
Aluminium cast alloys Mechanical properties Surface treatment Alumina layer Anodizat
2011/3/17
In this paper the usability of two casting methods, of sand and high pressure cast for the anodization of AlSi12 and AlSi9Cu3 aluminium cast alloys was investigated. With defined anodization parameter...
A novel approach to the design and optimisation of aluminium cast compo-nent heat treatment processes using advanced UMSA physical simulations
Heat treatment Castings Aluminium alloys Laboratory simulations
2010/2/9
Purpose: The goal of this publication is to present a new laboratory methodology for simulation of industrial melting, solidification and heat treatment using the patented Universal Metallurgical Simu...
Modelling of semi-liquid aluminium flow in extrusion with temperature effect
Innovative materials and foundry technologies thixoforming
2011/3/10
During thixoforming, when the material is in the semi-liquid state, it exhibits thixotropic properties, i.e. the unsupported material remains stiff and holds its shape so it can be readily handled, bu...